To figure out whether or not your wood floors are over and done with as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood instruction middle suggests these tests: First is direct your hand over the wood. If you can atmosphere the texture of the grain, the Eternity Flooring Saddle has a penetrating finish (usually a inclusion of a natural oil, such as linseed or tung oil, mixed as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Eternity Flooring Saddle is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after nearly 10 to 15 minutes, the floors are sealed as soon as wax. To surgically remove the white spots, use a fragment of fine steel wool lightly dampened as soon as wax and smear gently. The last is if you suspect a varnish or shellac, bow to a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been sealed as soon as one of the older realization methods, it will flake off.