To figure out whether or not your wood floors are the end once a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance center suggests these tests: First is manage your hand higher than the wood. If you can mood the texture of the grain, the Flooring Company Cincinnati has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, unclean once additives for drying) topped once wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, once polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Flooring Company Cincinnati is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after nearly 10 to 15 minutes, the floors are hermetically sealed once wax. To sever the white spots, use a piece of good steel wool lightly dampened once wax and smooth gently. The last is if you suspect a varnish or shellac, acknowledge a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed once one of the older triumph methods, it will flake off.