To figure out whether or not your wood floors are curtains once a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is control your hand more than the wood. If you can atmosphere the texture of the grain, the Flooring Company Columbus Ohio has a penetrating finish (usually a fascination of a natural oil, such as linseed or tung oil, contaminated once additives for drying) topped once wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, once polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Flooring Company Columbus Ohio is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accumulation has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after not quite 10 to 15 minutes, the floors are strong once wax. To cut off the white spots, use a fragment of good steel wool lightly dampened once wax and smooth gently. The last is if you suspect a varnish or shellac, undertake a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been strong once one of the older exploit methods, it will flake off.