To figure out whether or not your wood floors are the end with a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is direct your hand on top of the wood. If you can atmosphere the texture of the grain, the Flooring Company Croydon has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, dirty with additives for drying) topped with wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, with polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Flooring Company Croydon is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective lump has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after nearly 10 to 15 minutes, the floors are strong with wax. To remove the white spots, use a piece of fine steel wool lightly dampened with wax and smooth gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong with one of the older achievement methods, it will flake off.