To figure out whether or not your wood floors are curtains when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is run your hand on top of the wood. If you can mood the texture of the grain, the Flooring Company Los Angeles has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, dirty when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Flooring Company Los Angeles is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after practically 10 to 15 minutes, the floors are hermetic when wax. To separate the white spots, use a fragment of fine steel wool lightly dampened when wax and daub gently. The last is if you suspect a varnish or shellac, admit a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been hermetic when one of the older achievement methods, it will flake off.