The Best Home Improvement Ideas > Floor > Flooring Company Surrey

Flooring Company Surrey



Flooring Company Surrey

To figure out whether or not your wood floors are ended when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is control your hand beyond the wood. If you can quality the texture of the grain, the Flooring Company Surrey has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, unclean when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish on the Flooring Company Surrey is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after approximately 10 to 15 minutes, the floors are unquestionable when wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened when wax and massage gently. The last is if you suspect a varnish or shellac, allow a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unquestionable when one of the older talent methods, it will flake off.