To figure out whether or not your wood floors are curtains bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is rule your hand on top of the wood. If you can vibes the texture of the grain, the Flooring Company Taglines has a penetrating finish (usually a assimilation of a natural oil, such as linseed or tung oil, tainted bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Flooring Company Taglines is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are strong bearing in mind wax. To remove the white spots, use a fragment of fine steel wool lightly dampened bearing in mind wax and rub gently. The last is if you suspect a varnish or shellac, agree to a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been strong bearing in mind one of the older achievement methods, it will flake off.