The Best Home Improvement Ideas > Floor > Flooring Company Victoria Bc

Flooring Company Victoria Bc



Flooring Company Victoria Bc

To figure out whether or not your wood floors are ended in imitation of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance center suggests these tests: First is direct your hand on top of the wood. If you can atmosphere the texture of the grain, the Flooring Company Victoria Bc has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, infected in imitation of additives for drying) topped in imitation of wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, in imitation of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Flooring Company Victoria Bc is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective buildup has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are unassailable in imitation of wax. To remove the white spots, use a piece of good steel wool lightly dampened in imitation of wax and massage gently. The last is if you suspect a varnish or shellac, undertake a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been unassailable in imitation of one of the older completion methods, it will flake off.