To figure out whether or not your wood floors are finished considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is manage your hand greater than the wood. If you can air the texture of the grain, the Flooring Contractors Baton Rouge has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, poisoned considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads going on and does not soak into the wood, the finish on the Flooring Contractors Baton Rouge is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after nearly 10 to 15 minutes, the floors are sound considering wax. To sever the white spots, use a fragment of good steel wool lightly dampened considering wax and rub gently. The last is if you suspect a varnish or shellac, assume a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been sound considering one of the older skill methods, it will flake off.