To figure out whether or not your wood floors are ended with a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion middle suggests these tests: First is govern your hand more than the wood. If you can vibes the texture of the grain, the Flooring Contractors Durham Nc has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, tainted with additives for drying) topped with wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, with polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Flooring Contractors Durham Nc is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are hermetic with wax. To sever the white spots, use a piece of good steel wool lightly dampened with wax and smooth gently. The last is if you suspect a varnish or shellac, agree to a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been hermetic with one of the older talent methods, it will flake off.