To figure out whether or not your wood floors are done subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is control your hand exceeding the wood. If you can feel the texture of the grain, the Flooring Contractors Evansville In has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, tainted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Flooring Contractors Evansville In is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after more or less 10 to 15 minutes, the floors are sound subsequent to wax. To sever the white spots, use a piece of good steel wool lightly dampened subsequent to wax and smooth gently. The last is if you suspect a varnish or shellac, allow a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sound subsequent to one of the older talent methods, it will flake off.