To figure out whether or not your wood floors are the end subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is run your hand beyond the wood. If you can tone the texture of the grain, the Flooring Contractors Gloucester has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, mixed subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the Flooring Contractors Gloucester is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after practically 10 to 15 minutes, the floors are sealed subsequent to wax. To separate the white spots, use a fragment of fine steel wool lightly dampened subsequent to wax and daub gently. The last is if you suspect a varnish or shellac, acknowledge a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sealed subsequent to one of the older talent methods, it will flake off.