To figure out whether or not your wood floors are the end as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel center suggests these tests: First is direct your hand more than the wood. If you can vibes the texture of the grain, the Flooring Contractors Little Rock Ar has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, unclean as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Flooring Contractors Little Rock Ar is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after not quite 10 to 15 minutes, the floors are strong as soon as wax. To separate the white spots, use a fragment of fine steel wool lightly dampened as soon as wax and smear gently. The last is if you suspect a varnish or shellac, take a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been strong as soon as one of the older expertise methods, it will flake off.