To figure out whether or not your wood floors are curtains like a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is manage your hand over the wood. If you can character the texture of the grain, the Flooring Contractors London Ontario has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, mixed like additives for drying) topped like wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, like polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Flooring Contractors London Ontario is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after roughly 10 to 15 minutes, the floors are strong like wax. To separate the white spots, use a fragment of fine steel wool lightly dampened like wax and smooth gently. The last is if you suspect a varnish or shellac, undertake a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been strong like one of the older carrying out methods, it will flake off.