To figure out whether or not your wood floors are ended similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is manage your hand on top of the wood. If you can atmosphere the texture of the grain, the Flooring Contractors Midlands has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, impure similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the Flooring Contractors Midlands is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after about 10 to 15 minutes, the floors are sound similar to wax. To remove the white spots, use a fragment of fine steel wool lightly dampened similar to wax and massage gently. The last is if you suspect a varnish or shellac, receive a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sound similar to one of the older realization methods, it will flake off.