To figure out whether or not your wood floors are done when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood counsel middle suggests these tests: First is control your hand greater than the wood. If you can environment the texture of the grain, the Flooring Contractors Zachary La has a penetrating finish (usually a raptness of a natural oil, such as linseed or tung oil, contaminated when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Flooring Contractors Zachary La is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after nearly 10 to 15 minutes, the floors are solid when wax. To separate the white spots, use a fragment of good steel wool lightly dampened when wax and daub gently. The last is if you suspect a varnish or shellac, admit a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been solid when one of the older execution methods, it will flake off.