To figure out whether or not your wood floors are finished past a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is rule your hand on top of the wood. If you can mood the texture of the grain, the Floors For Living League City has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, mixed past additives for drying) topped past wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, past polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Floors For Living League City is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective layer has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are hermetic past wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened past wax and rub gently. The last is if you suspect a varnish or shellac, believe a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been hermetic past one of the older talent methods, it will flake off.