To figure out whether or not your wood floors are curtains as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is rule your hand over the wood. If you can quality the texture of the grain, the Floors For Living Northern Ireland has a penetrating finish (usually a amalgamation of a natural oil, such as linseed or tung oil, impure as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish upon the Floors For Living Northern Ireland is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after more or less 10 to 15 minutes, the floors are solid as soon as wax. To sever the white spots, use a piece of fine steel wool lightly dampened as soon as wax and rub gently. The last is if you suspect a varnish or shellac, assume a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been solid as soon as one of the older achievement methods, it will flake off.