To figure out whether or not your wood floors are done subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is direct your hand on top of the wood. If you can mood the texture of the grain, the Floors For Living Tomball has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, impure subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Floors For Living Tomball is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after just about 10 to 15 minutes, the floors are strong subsequent to wax. To separate the white spots, use a piece of good steel wool lightly dampened subsequent to wax and rub gently. The last is if you suspect a varnish or shellac, take on a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong subsequent to one of the older expertise methods, it will flake off.