To figure out whether or not your wood floors are over and done with similar to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance center suggests these tests: First is manage your hand over the wood. If you can vibes the texture of the grain, the Floors For Living Westheimer has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, poisoned similar to additives for drying) topped similar to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, similar to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Floors For Living Westheimer is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after virtually 10 to 15 minutes, the floors are sealed similar to wax. To sever the white spots, use a fragment of fine steel wool lightly dampened similar to wax and daub gently. The last is if you suspect a varnish or shellac, agree to a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been sealed similar to one of the older success methods, it will flake off.