To figure out whether or not your wood floors are done when a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information center suggests these tests: First is manage your hand higher than the wood. If you can atmosphere the texture of the grain, the Haven Flooring Company Great Yarmouth has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, contaminated when additives for drying) topped when wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, when polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Haven Flooring Company Great Yarmouth is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white a skin condition form beneath the droplets after more or less 10 to 15 minutes, the floors are solid when wax. To sever the white spots, use a fragment of fine steel wool lightly dampened when wax and smear gently. The last is if you suspect a varnish or shellac, say yes a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been solid when one of the older talent methods, it will flake off.