To figure out whether or not your wood floors are the end once a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is direct your hand higher than the wood. If you can atmosphere the texture of the grain, the High End Vinyl Flooring That Looks Like Wood has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, mixed once additives for drying) topped once wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, once polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish on the High End Vinyl Flooring That Looks Like Wood is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle on a few drops of water and white bad skin form beneath the droplets after very nearly 10 to 15 minutes, the floors are unassailable once wax. To separate the white spots, use a fragment of good steel wool lightly dampened once wax and daub gently. The last is if you suspect a varnish or shellac, believe a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been unassailable once one of the older talent methods, it will flake off.