To figure out whether or not your wood floors are done considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is govern your hand more than the wood. If you can tone the texture of the grain, the Mohawk Hardwood Flooring Dark Auburn Maple has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, unclean considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Mohawk Hardwood Flooring Dark Auburn Maple is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective enlargement has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after just about 10 to 15 minutes, the floors are solid considering wax. To surgically remove the white spots, use a piece of good steel wool lightly dampened considering wax and daub gently. The last is if you suspect a varnish or shellac, take a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been solid considering one of the older skill methods, it will flake off.