To figure out whether or not your wood floors are finished as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood suggestion center suggests these tests: First is govern your hand greater than the wood. If you can setting the texture of the grain, the Mohawk Hardwood Flooring Houston has a penetrating finish (usually a concentration of a natural oil, such as linseed or tung oil, dirty as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads in the works and does not soak into the wood, the finish upon the Mohawk Hardwood Flooring Houston is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective deposit has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are unquestionable as soon as wax. To surgically remove the white spots, use a piece of fine steel wool lightly dampened as soon as wax and massage gently. The last is if you suspect a varnish or shellac, say yes a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unquestionable as soon as one of the older execution methods, it will flake off.