To figure out whether or not your wood floors are curtains subsequent to a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood information middle suggests these tests: First is run your hand exceeding the wood. If you can air the texture of the grain, the Mohawk Hardwood Flooring Lowes has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, polluted subsequent to additives for drying) topped subsequent to wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, subsequent to polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish upon the Mohawk Hardwood Flooring Lowes is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective mass has worn away. Fourth, if you sprinkle upon a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are unassailable subsequent to wax. To remove the white spots, use a fragment of good steel wool lightly dampened subsequent to wax and smear gently. The last is if you suspect a varnish or shellac, agree to a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been unassailable subsequent to one of the older finishing methods, it will flake off.