To figure out whether or not your wood floors are ended considering a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance center suggests these tests: First is manage your hand higher than the wood. If you can mood the texture of the grain, the Mohawk Hardwood Flooring Red Oak Natural has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, dirty considering additives for drying) topped considering wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, considering polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads taking place and does not soak into the wood, the finish upon the Mohawk Hardwood Flooring Red Oak Natural is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after very nearly 10 to 15 minutes, the floors are strong considering wax. To cut off the white spots, use a piece of good steel wool lightly dampened considering wax and massage gently. The last is if you suspect a varnish or shellac, understand a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been strong considering one of the older completion methods, it will flake off.