To figure out whether or not your wood floors are finished later than a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is control your hand greater than the wood. If you can mood the texture of the grain, the Mohawk Hardwood Flooring Wel 13 20 has a penetrating finish (usually a captivation of a natural oil, such as linseed or tung oil, impure later than additives for drying) topped later than wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, later than polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Mohawk Hardwood Flooring Wel 13 20 is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective bump has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after just about 10 to 15 minutes, the floors are unassailable later than wax. To separate the white spots, use a fragment of good steel wool lightly dampened later than wax and smooth gently. The last is if you suspect a varnish or shellac, resign yourself to a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been unassailable later than one of the older capability methods, it will flake off.