To figure out whether or not your wood floors are the end in imitation of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood recommendation middle suggests these tests: First is direct your hand beyond the wood. If you can feel the texture of the grain, the Quick Step Flooring Belfast has a penetrating finish (usually a immersion of a natural oil, such as linseed or tung oil, mixed in imitation of additives for drying) topped in imitation of wax. Second, in an out-of-the-way spot, dab upon a little paint remover. If the finish bubbles up, it is a surface finish, in imitation of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads occurring and does not soak into the wood, the finish upon the Quick Step Flooring Belfast is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective growth has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after more or less 10 to 15 minutes, the floors are unassailable in imitation of wax. To separate the white spots, use a fragment of good steel wool lightly dampened in imitation of wax and massage gently. The last is if you suspect a varnish or shellac, recognize a coin and scratch the surface of the floor in an inconspicuous corner. If the floor has been unassailable in imitation of one of the older finishing methods, it will flake off.