To figure out whether or not your wood floors are the end as soon as a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood guidance middle suggests these tests: First is rule your hand exceeding the wood. If you can quality the texture of the grain, the Quick Step Flooring Home Depot has a penetrating finish (usually a incorporation of a natural oil, such as linseed or tung oil, dirty as soon as additives for drying) topped as soon as wax. Second, in an out-of-the-way spot, dab on a little paint remover. If the finish bubbles up, it is a surface finish, as soon as polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads happening and does not soak into the wood, the finish on the Quick Step Flooring Home Depot is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective increase has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after not quite 10 to 15 minutes, the floors are hermetically sealed as soon as wax. To sever the white spots, use a fragment of good steel wool lightly dampened as soon as wax and smooth gently. The last is if you suspect a varnish or shellac, understand a coin and scuff the surface of the floor in an inconspicuous corner. If the floor has been hermetically sealed as soon as one of the older talent methods, it will flake off.