To figure out whether or not your wood floors are finished bearing in mind a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is rule your hand more than the wood. If you can feel the texture of the grain, the Quick Step Flooring Lowes has a penetrating finish (usually a combination of a natural oil, such as linseed or tung oil, impure bearing in mind additives for drying) topped bearing in mind wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, bearing in mind polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads occurring and does not soak into the wood, the finish on the Quick Step Flooring Lowes is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective accrual has worn away. Fourth, if you sprinkle on a few drops of water and white spots form beneath the droplets after about 10 to 15 minutes, the floors are sound bearing in mind wax. To sever the white spots, use a piece of fine steel wool lightly dampened bearing in mind wax and daub gently. The last is if you suspect a varnish or shellac, endure a coin and graze the surface of the floor in an inconspicuous corner. If the floor has been sound bearing in mind one of the older realization methods, it will flake off.