To figure out whether or not your wood floors are the end in the manner of a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood opinion middle suggests these tests: First is control your hand higher than the wood. If you can character the texture of the grain, the Reviews On Vinyl Flooring That Looks Like Wood has a penetrating finish (usually a interest of a natural oil, such as linseed or tung oil, mixed in the manner of additives for drying) topped in the manner of wax. Second, in an out-of-the-way spot, dab upon a tiny paint remover. If the finish bubbles up, it is a surface finish, in the manner of polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, place a few drops of water. If the water beads up and does not soak into the wood, the finish upon the Reviews On Vinyl Flooring That Looks Like Wood is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle upon a few drops of water and white bad skin form beneath the droplets after about 10 to 15 minutes, the floors are unquestionable in the manner of wax. To remove the white spots, use a piece of fine steel wool lightly dampened in the manner of wax and smooth gently. The last is if you suspect a varnish or shellac, undertake a coin and cut the surface of the floor in an inconspicuous corner. If the floor has been unquestionable in the manner of one of the older capability methods, it will flake off.