To figure out whether or not your wood floors are finished taking into consideration a polyurethane, shellac, wax or varnish, or have a finish that has worn away and is no longer providing coverage, the American Hardwood assistance middle suggests these tests: First is control your hand more than the wood. If you can tone the texture of the grain, the Verona Eternity Flooring has a penetrating finish (usually a engagement of a natural oil, such as linseed or tung oil, polluted taking into consideration additives for drying) topped taking into consideration wax. Second, in an out-of-the-way spot, dab on a tiny paint remover. If the finish bubbles up, it is a surface finish, taking into consideration polyurethane, which coats the floor in a protective layer.
The third is in an out-of-the-way area, area a few drops of water. If the water beads stirring and does not soak into the wood, the finish on the Verona Eternity Flooring is intact. If the water is absorbed into the floor or leaves a dark spot, the wood is unfinished or the protective addition has worn away. Fourth, if you sprinkle on a few drops of water and white a skin condition form beneath the droplets after virtually 10 to 15 minutes, the floors are strong taking into consideration wax. To cut off the white spots, use a piece of fine steel wool lightly dampened taking into consideration wax and daub gently. The last is if you suspect a varnish or shellac, endure a coin and scrape the surface of the floor in an inconspicuous corner. If the floor has been strong taking into consideration one of the older expertise methods, it will flake off.